SHOOTING ACCESSORIES

These very popular magnifying scoring gauges allow for the scoring of the target without plugging the shot hole. They are especially usefull for the scoring of postal match targets or competition targets where the shooter is not allowed to plug. The target can be scored without disturbing the hole. This is the only way to score targets with multiple shot holes which are clustered together. Targets can be checked right on the range by the shooter before it is officially scored. Three models are available, each with two calibres on the same gauge. Ring sizes are as ISSF specified. [.22/.177], [.32/.38] and [.38/.45]

[Dealer Inquiries are Invited]

     Slimline     
 PLASTIC SIGHT INSERTS

These plastic front sight inserts are machine-turned from aircraft grade acrylic sheeting 0.100" thick. The center hole and the outside diameter are machine-turned simultaneously so that the two edges are absolutely concentric. They are not cast and material shrinkage is therefore not a factor. The machined surfaces are guaranteed to be within 0.002" tolerance. They are available to fit the following makes: Anschutz, Steyr, Walther, Feinwerkbau and Redfield.

A rotary-type plastic holder is available to keep the inserts clean and free from scratches. SLIMLINE plastic sight inserts have been used to set many world records since their introduction in 1974 and are now being used the world over. They are unique because they produce a very narrow line at the target when viewed, [3.5 MOA ring thickness at the target]. A narrow ring thickness is preferred by top shooters.

[Dealer Inquiries are Invited]

FX HIGH PRESSURE PUMP

 

The FX [Sweden] handpump is the most advanced model on the market today, replacing the Axsor due to the easier pumping. This is the ideal way to become independent of expensive SCUBA tanks. A handpump will always give you a full cylinder up to 250 BAR which the SCUBA tank will not. There is nothing else to buy, screw on your cylinder with the cylinder adapter that comes with your pistol and start pumping.....You can expect four to six shots from each stroke of the pump. The pump has a patented three-stage compressing system which will deliver up to 250 BAR and there is no maintenance required. Pumping volume is 230 cu. cm. per stroke. The FX has a built-in filter and moisture condensation system. Detailed filling procedures are supplied with the pump. The pump will accept all popular match airgun cylinders such as Feinwerkbau, Walther, Steyr, Morini, Pardini,  Twinmaster etc.


Home