|
|

New to North
America!!

Hawke Sport Optics™ provide a complete range of sporting optical products for active outdoor use. There is a wide choice of riflescopes for the hunter and target shooter, binoculars and spotting scopes for recreation and wildlife watching. All Hawke products are constructed with Grade 'A' materials in the world's finest optical factories, to give a lifetime of reliability and satisfaction.
**NEW** Check On-Line Ordering for the Latest Prices!
![]() |
30/30: This pattern can be used to measure distance. Using the 30/30 reticle the fine cross hair lines represent an area 30" across at 4x magnification at a distance of 100 yards. If the same target fills only half the crosshair area then the target is 200 yards away. The 30/30 reticle is easy to see in dark cover and scrub due to the enlarged reticle posts. The 30/30 is featured on Sport-HD™, Eclipse™, Titanium™ and on 4 Endurance™ riflescopes.
|
![]() |
Mil-Dot Reticle: The Hawke™ Mil-Dot Reticle can be used for accurate range finding at 10x magnification. There are 11 aiming points for elevation and 11 for windage, which enables the shooter to hold over or hold under or left and right to compensate for long and short range shots and windage respectively. The Mil-Dot is featured on Reflex™, Airmax™, Varmint™ and Pro-Stalk™ riflescopes.
|
![]() |
1/8 Min Dot: The dot at the centre of the cross hairs represents 1/8th minute in diameter at 24x magnification. At 100 yards the dot represents 1/8th of an inch, (1/8"). At 200 yards the dot represents 1/4 of an inch, (1/4"). The cross hair is ultra fine, which eliminates the target from being obscured, making this reticle perfect for long and short range target shooting. The 1/8 Min Dot reticle is featured on the Target riflescopes.
|
![]() |
Illuminated Centre Cross 30/30 Reticle: For night time and low light shooting this reticle is hard to beat. The glass etched 30/30 reticle has 11 brightness levels to illuminate the centre cross. The heavier posts are hard to lose even in the poorest light or whilst lamping. This reticle can be used to bracket game like the standard 30/30 reticle. This reticle is featured on the Nite-Eye™ 4-16x50IR, Endurance™ 4x42IR and 1.5-6x42IR.
|
![]() |
Illuminated Mil-Dot Reticle: This etched solid glass reticle is the ultimate for hunting in low light conditions. With 11 levels of brightness the reticle is easy to acquire when the light fades and is subtle enough not to destroy your night vision. The illuminated Mil-Dot reticle can be used in exactly the same way as the standard Mil-Dot reticle. The illuminated Mil-Dot reticle is featured on the Nite-Eye™ 3-9x50 IR, 3-12x50 AO IR and 6.5-20x50 AO IR.
|
![]() |
Illuminated 30/30 Reticle: This reticle is for shooters who prefer the more traditional 30/30 reticle but require the added advantage of illumination. The reticle performs perfectly at night and at times of low light. This reticle operates in exactly the same way as the other 30/30 reticles and can be used to bracket game. As with all Hawke™ illuminated reticles they have 11 brightness settings and can be used as normal non-illuminated reticles. Featured on the Nite-Eye 3-10x44 IR.
|
![]() |
Coin slot
style turrets are sharp and precise with each
'click' representing an adjustment of 1/4" at 100 yards.
Coin slot turrets can compensate for adjustments in elevation and
windage. The turrets can move the point of impact by up to 75"
at 100 yards should the need arise. To adjust these turrets one
needs a coin, which makes sure that all adjustments are deliberate and
accurate. The turrets are protected by screw down dust caps that are
waterproof and dustproof.
|
![]() |
Fingertip style turrets are sharp and precise and easy to
adjust with your fingers. Each click represents an adjustment of
1/4" at 100 yards. Fingertip turrets can compensate for
adjustments in elevation and windage. Fingertip turrets can move the
point of impact by up to 80" at 100 yards should the
need arise. To adjust these turrets simply maneuver fore finger and
thumb around the turret and turn. The turrets are protected by screw
down dust caps that are waterproof and dust proof.
|
![]() |
Posi-Grip
BDC style turrets are sharp and precise and easy to adjust with
your fingers even when wearing gloves. Each click represents an
adjustment of 1/4" at 100 yards. Posi-Grip turrets can
compensate for adjustments in elevation and windage and can move the
point of impact by up to 65" at 100 yards should the
need arise. The turrets are protected by screw down dust caps that are
waterproof and dust proof.
|
![]() |
Open
Glove Turrets are very sharp and very precise and easy to
adjust with your fingers even when wearing gloves. Each click represents
an adjustment of 1/8" at 100 yards. Open glove turrets
can compensate for adjustments in elevation and windage and can move the
point of impact by up to 32" at 100 yards should the
need arise. The turrets are open and do not need caps. They are
waterproof and dust proof on their own.
|
![]() |
HD
optical coatings reduce both internal and external reflections, thereby
increasing the amount of light that reaches the eye. In turn the lens
system improves target brightness and contrast. The lenses are precision
ground from top quality optical glass and finished with layers of
optical coatings to enhance the clarity and improve contrast. The colour
of the objective lens in the HD system in blue.
HD lenses are featured on all Sport-HD™ riflescopes.
|
![]() |
The
CLS is ideal for shooting in low light conditions as they have
been designed to pass more light and provide greater image contrast. As
with HD lenses the CLS features precision ground lenses
made form top quality optical glass. The lenses are individually
finished with layers of optical coatings. The objective lenses appear
green or gold/purple depending on the scope model and the angle to which
it is viewed. The CLS is featured on Reflex™, Airmax™,
Nite-Eye™, Varmint™, Target, Eclipse™, Eclipse 30 and Endurance™ ranges.
|
![]() |
HT
Lenses provide top performance in the lowest light conditions.
HT lens systems are fully multi-coated with 11 layers of
optical coatings to enhance the clarity, improve the contrast and
maximize the amount of light available to the eye. After being coated
the lenses are Heat Treated to give
ultimate clarity in the field. The result is a scope that keeps on
performing in the poorest of light. The objective lenses appear green or
gold/purple. The CLS is featured on the Pro-Stalk™ and
Titanium ranges.
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
*Exit Pupil: All figures are Exit Pupil Range in Variable (mm).
|
Features - Indent click Fast Focus Eyebell - 1/4” M.O.A. sniper turrets - Fully multi-coated optics - Mono block construction - Side wheel parallax from 10yds to infinity - Flip-up cover for objective lens - 2 x Sunshades - Screw-in lens cover |
|
|
|
|
|
|
| HK3922 - SW 4-12x52 | HK3924 - SW 6-18x52 | HK3926 - SW 6.5-26x52 | HK3928 - SW 8.5-34x52 |
|
Length 343mm Weight 760g Field of View 8.3-2.9m/100m Eye Relief 98-76mm Eyebell Fast Focus PX Adjustable Yes |
Length 388mm Weight 770g Field of View 5.5-2m/100m Eye Relief 102-84mm Eyebell Fast Focus PX Adjustable Yes |
Length 394mm Weight 780g Field of View 4.6-1.3m/100m Eye Relief 102-74mm Eyebell Fast Focus PX Adjustable Yes |
Length 415mm Weight 790g Field of View 3.8-1m/100m Eye Relief 102-74mm Eyebell Fast Focus PX Adjustable Yes |

|
When Zeroing your Hawke SR12 please use these zero points
as a guide and set the scope to 12x .22 Air Rifle 11.5ft/lb Pellet 16-16.5 grains Zero at 30 yds - Additional aim point as opposite SR12
|
![]() |
|
When Zeroing your Hawke SR6 please use these zero points as
a guide and set the scope to 6x .22 Air Rifle 11.5ft/lb Pellet 16-16.5 grains Zero at 30 yds - Additional aim point as opposite SR6 For .177 Air Rifle using 7.9-8.5 grains Use the SR6 and set the magnification to 12x. Zero at 40yds |
![]() |
| On
Rimfire Rifles with 1050ft/lb subsonic ammunition, Zero at 75 yds and turn the SR12 scope down to 8x. (SR6 to 4x) By adjusting the scope to these settings, the additional aim points are as the diagram opposite. |
![]() |
| On
a Centrefire Rifles with 'Ultra Flat'
power zero at 250 yds and turn the SR12 scope up to 24x By adjusting the scope to these settings the additional aim points are as the diagram opposite. |
![]() |
| On
a Centrefire Rifles with 'Stalking'
power zero at 200 yds and turn the SR6 scope up to 12x By adjusting the scope to these settings the additional aim points are as the diagram opposite. |
![]() |

**NEW** Check On-Line Ordering for the Latest Prices!